Sales & Support: +86-10-51908781/51909163Email: info@sinovogroup.com
Super Rig
Home - Products - Super Rig - Super Rig
20190906135757_5630.jpg

Super Rig

SD2200 is a multi-functional full-hydraulic pile machine with advanced international technology. It can not only drill bored piles, percussion drilling, dynamic compaction on soft foundation, but also has all the functions of rotary drilling rig and crawler crane.

We can design and manufacture drilling rigs and piling machine according to customers requirements.

SD2200 is a multi-functional full-hydraulic pile machine with advanced international technology. It can not only drill bored piles, percussion drilling, dynamic compaction on soft foundation, but also has all the functions of rotary drilling rig and crawler crane. It also surpasses the traditional rotary drilling rig, such as ultra-deep hole drilling, perfect combination with full casing drilling rig to carry out complex work. It is especially suitable for the construction of occlusive pile, bridge pile, Sea and river Port foundation pile and high precision pile foundation of subway. The new super drilling rig has the advantages of high construction efficiency, low energy consumption and green advantages, and has the function of intellectualization and multi-purpose. The super drilling rig can be used in all kinds of complex terrain, such as Cobble and Boulder stratum, hard rock stratum, karst cave stratum and thick quicksand stratum, and can also be used to break old piles and waste piles.

Multifunctional hydraulic drill with full working condition

- Rotary drilling function
- Extruding and expanding function of expanded pile.
- Impact hammer function.
- Drive casing, wall protection and casing drilling function.
- Caterpillar crane hoisting function
- Reinforcing cage of pile driver and lifting function of drilling tool

This machine is multi-functional, can use all kinds of rotary drilling buckets and drilling tools for rotary drilling, function,at the same time, make use of their own advantages of variety of equipment in one, an engine to provide energy,energy saving, green economy.

The multifunctional hydraulic drilling rig has the following characteristics.

- Low fuel consumption and high construction efficiency, drill pipe can be quickly raised and lowered.
- One machine can be used for rotary drilling. It can also be used as a crawler crane and a dynamic compaction machine.
- Heavy crawler crane chassis with super stability, suitable for large torque drilling, as well as ultra-deep hole drilling.
- Perfect combination of full casing drilling rig for large torque casing drive, the realization of multi-functional integration of drilling machinery, casing drive drilling, rotary excavation, heavy hammer impact hard rock, rock grab,break old piles.
- The super drilling rig has the advantages of high integration, small construction area, suitable for high density urban municipal infrastructure projects, marine River platform foundation construction, greatly saving auxiliary construction costs.
- The Al technology module can be loaded to realize the intellectualization of the equipment.


Full hydraulic multifunctional drilling rig SD2200
Model SD2200
Undercarriage HQY5000A
Engine power 199 kw
Rotating speed 1900 rpm
Main pump flow 2X266 L/min
Nominal torque 220 kN.m
Speed of rotation 6~27 rpm
Spin off speed 78 rpm
Max drilling depth 75 m
Max drilling diameter 2200 mm
Max crowd force 180 kN
Max pull force 180 kN
Crowd stroke 1800 mm
Rope diameter 26 mm
Line pull (force 1st layer) of main winch 200 kN
Lind speed max of main winch 95 m/min
Rope diameter of auxiliary winch 26 mm
Line pull (force 1st layer) of auxiliary winch 200 kN
Outer pipe diameter of kelly bar Φ406
Kelly bar (Standard) 5X14m(Friction)
4X14m(Interlocking)
Kelly bar (Extension) 5X17m(Friction)
4X17m(Interlocking)

The multifunctional hydraulic drilling rig SD2200
HQY5000A Crane technical data (Lifting capacity 70 ton)


Item Data
Max rated lifting capacity 70 t
Boom length 12-54 m
Fixed jib length 9-18 m
Boom+jib max length 45+18 m
Boom derricking angle 30-80°
Hook 70/50/25/9 t
Working speed Rope speed Main winch hoist/lower Rope Dia26 *High speed 116/58 m/min Low speed 80/40 m/min (4th layer)
Auxiliary winch hoist/lower *High speed 116/58 m/min Low speed 80/40 m/min (4th layer)
Boom hoist Rope Dia 20 52 m/min
Boom lower 52 m/min
Slewing speed 2.7 r/min
Traveling speed 1.36 km/h
Gradeability(with basic boom,cab in the rear) 40%
Diesel engine rated output power/rev 185/2100 KW/r/min
Whole crane mass(without grab bucket) 88 t(with boom foot 70 ton hook)
Grounding pressure 0.078 Mpa
Counterweight 30 t
Noted: Speed with* may vary with the load.


HQY5000A Technical Data (Tamper)
Item Data
Tamper grade 5000 KN.m (Max12000KN.m)
Rated hammer weight 25 t
Boom length (angle steel boom) 28 m
Boom working angle 73-76°
Hook 80/50t
Working speed Rope speed Main winch hoist Rope Dia 26 0-95m/min
Main winch lower 0-95m/min
Boom hoist Rope Dia 16 52 m/min
Boom lower 52 m/min
Slewing speed 2.7 r/min
Traveling speed 1.36 km/h
Gradeability (with basic boom,cab in the rear) 40%
Engine power/rev 199/1900 KW/r/min
Single rope pull 20 t
Hoisting 28.8 m
Working radius 8.8-10.2m
Main crane transportation dimension(Lx Wx H) 7800x3500x3462 mm
Whole crane weight 88 t
Grounding pressure 0.078 Mpa
Counter weight 30 t
Max single transport quantity 48 t

Casing rotator dia 1500MM(optional)
Main specification of casing rotator
Drilling diameter 800-1500 mm
Rotating torque 1500/975/600 kN.m Max1800 kN.m
Rotating speed 1.6/2.46/4.0 rpm
Lower pressure of casing Max 360KN + self weight 210KN
Pull force of casing 2444 kN Max 2690 kN
Pressure-pulling stroke 750 mm
Weight 31 ton +( crawler optional) 7 ton

Main specification of power station
Engine model (ISUZU) AA-6HK1XQP
Engine power 183.9/2000 kw/rpm
Fuel consumption 226.6 g/kw/h( max)
weight 7 t
Control model Wired remote control




Product List

Hot Products

TOP
欧美av毛片